Fitting alloy wheel protectors in Grenoble: AlloyGator approved fitting centres

If you're looking for somewhere to have alloy wheel protectors fitted in Grenoble without losing half a day, an AlloyGator approved fitting centre in the area will take care of it in around an hour.

Grenoble and its surrounding area combine several factors that accelerate wear on alloy wheels: parking in a dense city centre, high kerbs on redesigned pedestrian streets, concrete-edged roundabouts on the ring road, and access to underground car parks such as the Esplanade or Caserne de Bonne, where lanes are measured to the nearest centimetre. On a 17- to 19-inch low-profile wheel, even the slightest scrape leaves a deep scratch that is hard to ignore. The AlloyGator profile — fitted between the tyre sidewall and the rim edge — absorbs this type of impact without removing the wheel or altering the geometry.

The approved fitting centre near Grenoble: Point S Crolles (RCGT)

The nearest AlloyGator approved fitting centre to Grenoble is located in Crolles, in the Grésivaudan valley, trading as Point S RCGT. Crolles is accessible from Grenoble in around twenty minutes via the RN90/RN523, making it the natural destination for residents of the northern agglomeration, the Chartreuse massif or the Grésivaudan valley.

This type of approved fitting centre has certified fitting equipment and a technician trained in the AlloyGator procedure. Fitting does not require the complete removal of the running gear: the wheel is taken off the vehicle, the tyre is slightly unseated from the rim edge, the profile is inserted and clipped into place. Typical duration: 45 to 60 minutes for a set of 4 wheels.

What the fitting actually includes

• AlloyGator set of 4 protectors: one profile per wheel, available in a range of colours (online configurator available at alloygator.fr)
• Fitting at an approved centre: approximately €99 for all 4 wheels, labour included
• Time in the workshop: 45 to 60 minutes, no extended appointment required
• Compatibility: alloy wheels from 13 to 22 inches, standard tubeless fitments
• Impact on existing setup: the profile modifies neither the tyre inflation pressure nor the existing wheel balance

For vehicles with 18- to 20-inch low-profile wheels — common on urban SUVs such as the Dacia Duster, BMW 3 Series or Audi A3 driven around the Grenoble area — alloy wheel protection is particularly relevant: the tyre sidewall does not protrude far enough to absorb lateral impacts.

Book an appointment and choose your colour

The process takes place in two steps. First, preview the look on your vehicle using the colour simulator available on the website, then order your AlloyGator set of 4 alloy wheel protectors in the chosen colour. You can then book a slot directly with the approved fitting centre via the AlloyGator approved fitters page, which lists all fitting points in the network, including Point S RCGT in Crolles.

The dedicated pages by vehicle brand also allow you to check compatibility and preview the look before purchasing — for example for BMW alloy wheel protectors, or for Audi models, which are particularly common in the Grenoble area.

FAQ

Is the Crolles centre the only AlloyGator approved fitter in the Grenoble area?

At the time of writing, Point S RCGT in Crolles is the approved fitting centre listed for the Grenoble / Grésivaudan area. The network is constantly evolving, so please check the full, up-to-date list on the approved fitters page of the website, which displays centres by département or postcode.

Should I bring my own AlloyGator set, or does the centre order it?

As a general rule, the set is ordered in advance on alloygator.fr in the colour of your choice and delivered directly to your home or to the centre. Confirm the arrangement with the centre when booking your appointment, to avoid any unnecessary waiting on the day of fitting.

Does fitting affect the MOT or the manufacturer's warranty?

The AlloyGator profile is fitted between the tyre sidewall and the wheel rim edge with no drilling or structural bonding. It does not fall within any MOT inspection criteria relating to tyres or wheels. Regarding the manufacturer's warranty on alloy wheels, the product modifies neither the structure of the wheel nor the tyre fitting: no documented case of a warranty refusal has been reported to date under normal use conditions.